Replacement LCD screen for the HP iPaq 5455 and 5555 WITH digitizer in 4 Star condition (see 'What the Stars Mean'). This is an LCD screen replacement with the glass top digitizer (touch screen). If your glass top is cracked or the screen has developed lines, the backlight has burned out, it has started 'bleeding' or has otherwise become damaged then here is a great tested replacement screen. This was pulled from an iPaq 5455 or 5555 and is in 4 Star condition so it will have some signs of use but not any deep scratches or major scuffs.

Installation Tip: When opening the HP iPaq 5x55 use a T5 size torx driver to remove the four screws on the back of the case. Open the case from the sides and bottom first then slide it slightly upward towards the top of the unit very slightly before completely removing the back. Note that the black plastic at the top of the PDA is a part of the back so be careful not to break any of the retaining clips. Reverse that process when closing the case.

Installation Tip: Make sure you remove the stylus and any expansion cards before removing the back case.

Note: This is the same screen that is used in some high end universal remote controls.

Associated Part Numbers:

LPH7123-1

LQ038Q7DB01

31019446

9360 302 01112

G3081132