Handspring Visor LCD only P/N PC1342. This is a genuine Handspring LCD for the Visor Neo or Visor Deluxe PDA.

The digitizer / touch screen is NOT included. If you are not familiar with removing touch screens from the LCD then you may not want this part since it is easy to break the touch screen when removing it from the old LCD.

NOTE: This LCD has a solder connection for the touch screen cable and should be used with the touch screen from the same type of LCD. You will need to solder the cable from the touch screen to the back of this LCD Make sure your touch screen is not the connector type as that will not work with this LCD unless you remove the connector and solder the wires to the back of the LCD. Also note that we usually ship the LCD with a defective touch screen in place to protect it during shipping, this also allows you to practice cutting a touch screen off of an LCD before you try it on your good one!

If your screen is broken or bleeding but your digitizer (the clear glass on top) is OK then you can replace just the LCD!

See our other Handspring parts for Visor repair and our accessories too.