iBiz iPaq 3600, 3700 Series Charge and Synch. Kit - A/C and 12V Plus USB Synch! - NEW

OK, normally we primarily only carry the original accessories that come with a PDA, but the iBiz line of accessories is pretty good and we were able to get some brand new! Overall they are innovative in design and better made than 'generic' accessories.

This kit is made for the HP iPaq line of PDAs that use the connector found on models such as the iPaq 3600 series (3630, 3635) and the iPaq 3700 series like the 3765. There are other models in that series that use the same connector.

But note that this will NOT work with the later models starting with the 3800 series like the 3845.

IMPORTANT: HP iPaq PDAs do NOT follow a sequential model numbering system. For example the 3600 was made before the 1910 which was made after the 5500. So a higher number does not mean it is newer. This cable is NOT compatible with the h3800 series such as the h3845 and it is NOT compatible with the newer RX series of iPaq (if your PDA was manufactured after 2004 then this will not work). Since these cables are sealed in that annoying plastic that you have to cut open, we can't accept returns if you order the wrong cable.

The kit has three components to it. First is an A/C wall adapter for charging your PDA. Second is a 12 Volt Auto / Car adapter also to charge your PDA. The third component is a cable that connects to the iPaq on one end and has a USB connection on the other end. You can use the cable to connect the iPaq to your computer or to either of the power adapters. Since both the A/C and the 12V chargers have a USB connector on them so you only need to bring these three things along with you when you travel to be able to charge and synchronize your iPaq.

Compatible Models (that we know of so far):

iPaq h3600 series

h3630

h3635

iPaq h3700 series

h3765